▒ Basic Type

This type pumps are designed to prevent any leakage or contamination perfectly during the chemical or sanitary process.

▒ Applications

Solvents Pumping, Oil Refineries, Reactors, Plating Systems, Medical plants

▒ Pump Spec List

▒ High Temperature cooling Type

This type pumps are designed not only for the transfer of heating medium oil and high temperature petroleum but also for synthesis process. It greatly reduces heat loss and prevents motor failure by separating thermally the main liquid from the flushing liquid.

▒ Applications

Heat Transfer oils, Petrochemical Synthesis Process, Polymerization process

▒ Pump Spec List

▒ High Melting Point Jacket Type

This type pumps are designed to prevent the danger of solidification which is normally found during the transfer of high melting point liquid. It keeps high temperature of the liquid by transmitting hot water or steam through jackets with which they are equipped on the outside of the pump and the motor.

▒ Applications

Caprolactam, Carboxylic Acid, Fatty oils, Caustic Soda

▒ Pump Spec List

▒ Reverse Circulation Type

This type pumps are designed to minimize cavitation which occurs during the transfer of saturated vapor pressure liquid as liquified gas. Minimization of the cavitation is accomplished by the pressurized inner structure.

▒ Applications

Ammonia, Freon, LPG, LNG

▒ Pump Spec List

▒ High Temperature Heat-proof Type

This type pumps are designed to save energy by using the thermal resistance inorganic substance as an insulation at the winding of motor. No cooling water is required even in transferring high temperature liquid.

▒ Applications

Heat Transfer Oils, Petrochemical Synthesis Process, Polymerization process

▒ Pump Spec List

▒ Self-Priming Type

This type pumps are designed to transfer the liquid which is placed under the level of the pump. The casing has a specially structured chamber to separate the air from mixed liquid that is drawn from the suction pipe.

▒ Applications

Solvent, Toluen, Benzene, EG + Waste Water

▒ Pump Spec List

▒ Vertical Slurry Handing Type

This type pumps are vertically designed to prevent bearing damage due to the slurries in liquid. A mechanical seal installed between the pump and the motor prevents the damage. This type pumps are also good for the transfer of the liquid of high melting point, due to the double jackets installed between the casing and the adapter.

▒ Applications

CEG, TEG+Slurry, H₂O+Tio₂, Lactam+TiO₂, TiO₂+EG

▒ Pump Spec List

▒ Absorption Chiller / Heater Type

This type pumps shows particularly low NPSH since the refrigerator operates under high vacuum state normally used for the circulation of both absorption solution and cooling medium.

▒ Applications

LiBr, H₂O

▒ Pump Spec List